sabato 27 giugno 2020

Contrast paint - first impressions


I bought a couple of Games Workshop Contrast Paint (Contrast from now on) one year ago, on the wave of enthusiasm. They have been sitting in a corner of my painting desk until this spring.  I was stuck with little to no willing of painting, so I decided to give them a try. I'm still painting.
I purchased about 3/4 of the line and these are my observation about them so far.


My Contrast collection so far. I should probably buy a rack for display

Contrast are not (of course) colors in the traditional term, since they are meant to paint both base and shades with one passage, so they are rather are highly pigmented inks or shade. Remember: they are very liquid. Colors vary a lot in pigment density and quality, for example Militarium Green is a bit light in pigment and need at least two coats to be efficient, otherwise it could result in speckled figures. Black Templar is also not very pigmented and can result in "not so black" color. Iyanden Yellow is, so far, my favorite color, even if tend to dissociate yellow and orange pigments so it need to be lay with a bit of attention and remember to shake the pot before painting.


Painting with Contrast only seems easy: painting with contrast at basic level is very accessible, but I think that achieving a high quality model requires a good hand skill, maybe at the same level than traditional painting: you can direct the flow of this liquid color, and the effect varies with the brush size, quantity of color absorbed in it, the pressure, the way you lay the color them, how many layer of paints you lay. So lot of different results, actually. Basilicanum Grey is paradigmatic: can vary a lot with the quantity of liquid placed on the miniature.

Cloak on left model, mail and sword on right one, are both painted with Basilicanum Grey.
Hard to believe, I know.

The primer is very important: I found myself at ease with Wraithbone spray but you really have to experiment: the final result can vary a lot. Only remind that a smooth basecoat is essential for let Contrast flow, the risk is the color could evidence the granularity of the primer.

Base Wraithbone is essential. It is the same primer but you can lay it with a brush: you will need it to cover the smears. Important! With small exceptions they're not able to cover other colors smear, and I suggest painting the figures from lighter to darker colors for this reason. 

Attention on metals! I tried using Contrast to shade Vallejo real metal colors and I found both Wildwood and Skeleton Horde tend to give them a brass effect. I decided for now to use non metal color (i.e. Basilicanum Grey, see picture above).


Not the best picture, but the gun was painted with Vallejo Silvermetal and then washed with Skeleton Horde. The result are brassy shadows. Other colors are Contrast.


Which miniatures are (in my opinion) best painted with contrast paint?  Well they work greats on simple, plain clothes and fur (both in clothes and on animals, including horses). I would avoid armies with a lot of tiny details (as Napoleonics), if you want to go full Contrast. Otherwise, you could use contrast paint for basic uniform and then revert to traditional painting for details. Also bear in mind that the colors selection is (compared with other brands) quite small: you will probably have issues finding the right shade of blue for that particular regiment in that particular campaign. But...you can always mix them and create new colors, I found no particular issues with that, just remember avoid mixing with water. 

In conclusion: the miniatures are not gonna painting themselves, but choosing the right subject they allow to spare an enormous amount of time and going right into playing with an army nicely painted (using it unpainted was never an option). I am very happy with them and I must thank them for getting back to painting.





Nessun commento:

Posta un commento